Garmin WebUpdater

I own a Garmin GPSmap 60CSx in order to geoencode my photography using HoudahGeo.

Garmin now has a means up updating the firmware in their GPSs by using a WebUpdater, of which I use the version for the Mac.

I Got Myself Into Trouble
In retrospect, I got myself into trouble by starting the program, it failed to detect the GPS, to which I turn on the GPS, and plugged it into the USB port. While the WebUpdater saw the device and went to update, it stayed in the “Erasing… Do Not Unplug” state for about two hours before I got brave.

What I Did, And Boy Was I Lucky
I couldn’t cancel. I couldn’t Quit. So I had to Force Quite by using Command-Option-Escape, that at least got WebUpdater to stop. The GPS was still stating “Loader Loading…” when I pulled the USB, and when that didn’t change anything, I turned off the power to it. I wasn’t so sure I was going to see much of anything when I powered it back on.

I got lucky. I turn the power back on and I was still at the old revision. Then plugged in the USB to the computer. Then started WebUpdater, which again noticed the GPS version, downloaded the firmware again, and had no problems installing it. Seems doing things in this order works just fine.

My Plans If I Was Unlucky
Over on Bill Turner’s site, he’s written an article about Fixing a Dead Garmin GPSMap 60CSx. It seems he’s learned holding down the Power Button and the Up Arrow at the same time while starting the WebUpdater software (I think he has three hands to pull this off), he’s able to force the GPS to identify itself to the updater. Problem is, according to his instructions, you have to keep holding down these button chord during the update; some comments on the blog state it isn’t necessary, and there’ve been mixed results as to whether this works universally or not.

I’m not sure I would have had the bravery to just go killing processes plain outright, but since Bill did such a nice job of providing an alternative, I felt it was worth the risk — even if I didn’t have to go that route. Thanks Bill for blogging your GPS recovery notes.

0 thoughts on “Garmin WebUpdater”

  1. Thanks Walt!

    I got into the same situation and found your post a comforting thought when interrupting a firmware update (version 3.90 to 4.00). It worked the second time for me too, this time first plugging the activated 60csx into the MacBook and then starting WebUpdater instead of the other way around.

    Maybe a WebUpdater bug?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.